500-170 FPDESGN

Exam Number 500-170 FPDESGN
Associated Certifications Cisco and NetApp FlexPod Design Specialist
Duration 60 Minutes (45 – 55 questions)
Available Languages English
Register Pearson VUE

The 500-170 FlexPod Design exam is the exam that will test System Engineers on their knowledge of FlexPod solution. This exam tests a candidate’s knowledge of tools and standards for assessing computing solution performance characteristics and requirements. In addition this exam will test a candidate’s knowledge of hardware components associated with the FlexPod Solution and the process for selecting proper hardware for a given set of requirements.

The FlexPod Design (FPDESGN) (500-170) exam is a 60-minute, 45-55 question exam that tests system engineers on their knowledge of the FlexPod solution. This exam tests a candidate’s knowledge of the tools and standards for assessing computing solution performance characteristics and requirements. In addition, this exam will test a candidate’s knowledge of the hardware components associated with the FlexPod solution and the process for selecting proper hardware for a given set of requirements.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 Compute 22%
1.1 Hardware components
1.2 Configuration
1.3 High availability
1.4 SAN boot
1.5 Cisco UCS manager

2.0 Networking 18%
2.1 Hardware components
2.2 Configuration
2.3 SAN boot
2.4 High availability

3.0 Storage 16%
3.1 Hardware components
3.2 Configuration
3.3 SAN boot
3.4 High availability

4.0 Virtualization 28%
4.1 Hypervisor solutions
4.2 SAN boot

5.0 Management and Orchestration Tools 16%
5.1 Management tools
5.2 Design tools


QUESTION 1
What is the maximum aggregate traffic available to a half-width UCS B-Series blade in a 5108
Chassis with two 2208XP Fabric Extenders, Cisco VIC 1240 adapter, and Cisco Port Expander
Card for VIC 1240?

A. 40 Gb
B. 80 Gb
C. 120 Gb
D. 320 Gb

Answer: B

Explanation:


QUESTION 2
Which four are components of Cisco UCS stateless computing? (Choose four)

A. Utilization of service profiles to apply parameter settings from server hardware
B. Elements of a server’s personality, which may be included in a service profile, include firmware
versions, UUID, MAC Addresses, World Wide Names, and boot settings.
C. A one to one mapping of an application to a server
D. Boot from SAN
E. Every physical server in a Cisco UCS instance should remain anonymous until you associate a
service profile with it
F. A one to one mapping to the identity information burned into the hardware (mac addresses,
etc).

Answer: A,B,D,E

Explanation:


QUESTION 3
Which connectivity mode for Cisco UCS C-Series Rack-Mount Server management is supported
beginning with Cisco UCS Manager release version 2.1 and above?

A. Dual-wire Management
B. Single-wire Management
C. Quad-wire Management
D. Side Frame management

Answer: B

Explanation:


QUESTION 4
Which feature is supported for virtual machines configured with Direct Path I/O using Cisco Virtual
Machine Fabric Extender (VM-FEX) distributed switches?

A. vMotion
B. Record and Play
C. Fault tolerance
D. Unlimited DVS creation per Cisco UCS domain

Answer: A

Explanation:


QUESTION 5
Which four VLANs can be configured on UCS platform? (Choose four)

A. 1
B. 199
C. 1001
D. 3968
E. 4001
F. 4047
G. 4090
H. 4096

Answer: A,B,C,G

Explanation:

Click here to view complete Q&A of 500-170 exam
Certkingdom Review

MCTS Training, MCITP Trainnig

Best Cisco 500-170 Certification, Cisco 500-170 Training at certkingdom.com

 

Leave a comment

(*) Required, Your email will not be published